Global Leader in Industrial Fasteners & CNC Parts
Shenzhen Suntech Industrial Fasteners Co....

Suntech is a Shenzhen-based manufacturer of industrial fasteners and precision CNC parts, operating under one roof in Bao'an district. We make both standard catalog fasteners and custom-engineered components — threaded fasteners, nuts, washers, cold-formed specials, plus CNC-turned, milled, Swiss-type, and mill-turn parts — and we export to customers across Europe, North America, and Asia.
Our parts go into small home appliances, optical systems, flashlights, and automotive assemblies. Typical components include VVT and throttle-control shafts, pipe joints, optical instrument housings, conductive and terminal pins, sleeves, insert nuts, bushings, and fittings.
Why Choose Suntech as Your CNC Partner
What separates Suntech from a commodity fastener trader or a single-line cold-heading shop is vertical integration. We operate 38 cold-heading and thread-rolling machines, four in-house heat-treatment lines, and three plating lines on the same site as our CNC machining division — so buyers can consolidate fasteners and precision parts on a single PO, with one quality system, one delivery window, and one point of contact.
Roughly 40% of our customers buy both fasteners and CNC parts together. They tell us this reduces supplier count, QC overhead, and logistics cost compared with splitting orders across separate factories.
We run two integrated divisions:
Industrial Fasteners Division — standard catalog plus custom engineered:
- Threaded fasteners. Hex head bolts (DIN 931/933/912), socket head cap screws (ISO 4762), flanged bolts (DIN 6921), carriage bolts, U-bolts, eye bolts. Sizes M1.6–M30, lengths up to 300 mm. Grades 4.8 / 6.8 / 8.8 / 10.9 / 12.9.
- Nuts. Hex nuts (DIN 934), nylon insert lock nuts (DIN 985), flange nuts (DIN 6923), weld nuts, clinch nuts, rivet nuts, cap nuts.
- Washers. Flat (DIN 125/126), spring (DIN 127/7980), external/internal tooth lock, wave, spherical, Belleville disc.
- Custom cold-formed specials. Shoulder bolts, step screws, custom head geometry, combined fastener assemblies.
Precision CNC Machining Division — all custom: CNC milled, CNC turned, Swiss-type, mill-turn, and ground components.
The consolidation advantage: buyers who source both divisions from one supplier reduce QC overhead and logistics cost versus splitting POs.
Six points differentiate us from traders and single-line cold-heading shops:
- We are the manufacturer, not a trader. Our 38 cold-heading and thread-rolling machines, plus heat-treatment and plating lines, are all on site and auditable.
- Engineering support on custom specials. Eight in-house tool designers run SolidWorks and AutoForm forming simulation before accepting an order, catching formability issues that cause tool breakage or missed delivery.
- Integrated in-house secondary operations. CNC turning and milling after cold heading, thread rolling, centerless grinding, laser marking, PEM patch-lock adhesive, washer assembly — all under one roof.
- Traceability depth. Each lot is marked with a 2D DataMatrix code linked to raw material heat number, die number, cold-heading operator, heat-treatment cycle log, plating batch, and inspection records — stored online for 10 years.
- Compliance. IATF 16949, ISO 14001, EU REACH, and US RoHS compliant for standard chemicals.
- Customer longevity. Average OEM relationship runs more than seven years, with two accounts dating back 13 years or more.
We offer a full coating matrix in-house and through approved partner lines:
- Zinc electroplating. Trivalent Cr(III) passivation (RoHS-compliant, no Cr VI), available in clear, blue, yellow, black, and olive drab. 72–500 hours salt spray per ASTM B117.
- Zinc alloy plating. Zinc-nickel (12–18% Ni), zinc-iron, zinc-cobalt — 1,000–1,500 hours neutral salt spray. Preferred for automotive underhood applications.
- Zinc flake (lamellar) coatings. Geomet® 321/500B, Magni® 565/570, Dörken MKS® Delta Protekt KL100 plus topcoat KL120. 720–1,500 hours NSS without red rust, no hydrogen embrittlement risk — critical for grade 12.9 bolts.
- Mechanical plating. Zinc 5–25 µm, tin, copper — for ultra-high-strength parts where electroplating hydrogen risk is unacceptable.
- Hot-dip galvanizing (HDG) per ISO 10684 — for outdoor structural wind, utility, and solar applications (M12–M30).
- Organic topcoats and anti-seize. PTFE, molybdenum disulfide (MoS2), silver plate, Xylan® for controlled torque-coefficient applications.
- Passivation. Stainless steel citric vs. nitric per ASTM A967 and AMS 2700.
- Phosphate coatings. Manganese (for oil retention on gears), zinc (paint base).
Coating certifications available from TÜV, RoHS, and REACH bodies. Custom specifications quoted on request.
Our Fastener New Product Introduction (NPI) process:
- Concept review. Buyer sends drawing plus PPAP level and volume estimate. Our tool engineer runs forming simulation within one business day and flags any risks (head-fill, thread-rolling die life, stripping torque behavior).
- Quotation and DFM report. Cost breakdown by operation, comparison against the closest DIN/ISO standard alternative (in case a standard part reduces cost), and lead time.
- Tooling. If custom dies or punches are needed, they are manufactured in our on-site EDM and grinding tool room — typically 5–7 days.
- First article samples. 50–200 piece trial run, full FAIR (AS9102) dimensional report, material certificate, coating test report, and optional torque-tension, hardness, or salt-spray data.
- FA approval. Sign-off by the buyer's quality team; Process Control Plan is locked; SPC parameters established for production.
- Production ramp-up. First production lot gets double inspection and a Cpk study on 50 pieces; once Cpk exceeds 1.67, regular production begins.
Typical NPI timeline: 7–14 days for standard custom specials, 25–35 days for complex five-die progressive forms or assemblies.
Yes. High-volume repeat accounts qualify for our SmartSupply™ vendor-managed inventory, with three models:
- Domestic China buffer. 4–6 weeks of safety stock held in our Shenzhen finished-goods warehouse; orders release via EDI 830 or email, ship within 24 hours.
- Regional consignment. Bulk inventory shipped to a 3PL in Hamburg, Los Angeles, or Yokohama; buyer pulls Kanban quantities and pays only on withdrawal.
- Just-in-time line feed. For customers above US$3M annual spend, we maintain a 12-week rolling forecast and ship air plus sea mix synchronized to their ERP production schedule, with weekly delivery windows.
Current VMI programs are active for 11 accounts. The process integrates with MRP systems including SAP S/4HANA, Oracle Cloud, NetSuite, Infor LN, and MS Dynamics.
Looking for precision-machined parts for your project? Contact Suntech today for a free quote, engineering support, and reliable delivery. We serve clients across Europe, North America, and Asia.



